|167||(R1) 21, (R2) 13, (R3) 18||132_84_115|
|172||(R1) 23, (R2) 14, (R3) 19||132_84_115|
|177||(R1) 24, (R2) 15, (R3) 21||132_84_115|
|182||(R1) 26, (R2) 16, (R3) 22||132_84_115|
|177||1827 g||2861 g|
Tip & Tail Rocker
3D WoodCore Light
Lowride XL 13 FR
VWerks Demo GW
hard snow performance
all conditions performance
long turn dynamics
short turn agility
Just when you think it can’t get any better, the Völkl R&D team will prove you wrong – as with the Deacon V.WERKS edition.
The premium model with 84 mm under the boot and a weight of just 1,830 grams (177 cm length w/o binding) features Völkl’s innovative tailored carbon tips and tails. Never before has it been possible to distribute power to the tip and tail in such a precise way while also offering full dynamics and impressive liveliness. The carbon fibres are no longer integrated as a uniform fleece but added through a stitching process in such way that their orientation and strength are perfectly tailored to the functional requirements of each ski section. As the most important areas of a slope ski are the tip and tail, these are the areas with the highest concentration of carbon fibres, offering a fantastic liveliness and dynamic on all pistes with only minimal skier effort.
The ski is built with our innovative 3D Radius sidecut technology. This makes it possible to optimally tailor the tip and tail rocker design to the three interconnecting radii for excellent smoothness and stability at the highest speeds and in demanding piste conditions.
To increase the power transmission and shock absorption qualities even further, the Deacon V.WERKS comes with a 0.7mm thick Titanal frame that surrounds the most stressed tip and tail areas. This highly complex technical structure enables a brand-new combination of liveliness and speed stability.
The IPT Lowride binding system is lighter than its predecessor and has been carefully integrated into the ski body for impressive power transmission.
If you’re looking for a highly versatile, incredibly powerful, super light and extremely sporty all-mountain ski for smooth rides in all conditions, the Deacon V.WERKS is a must for your shortlist.
Carbon Fiber Functional Placement
In this construction carbon fibers are no longer incorporated as a uniform fleece.
In this construction carbon fibers are no longer incorporated as a uniform fleece. They are integrated through a stitching process in such a way that their orientation and strength meet the functional requirements of each part of the ski. As the tip and the tail are the most influencial sections on a ski the carbon fibres are concentrated exactly in these areas. As a result the power transmission is extremely precise and liveliness and energy are accesible with minimal effort.
3D Radius Sidecut
Three radii in one ski for maximum turning & speed versatility in all mountain skiing
IPT Lowride XL
Especially for wider skis: 10 mm lower stand height for increased agility and better edge grip
3D Hybrid Multilayer Woodcore
A very dynamic woodcore with a combination of hard wood, poplar, beech and isocore in the center and an super light hard...
A very dynamic woodcore with a combination of hard wood, poplar, beech and isocore in the center and an super light hard wood poplar mix in the outer areas. The 3D Hybrid Mulitlayer Woodcore can be found in the Deacon V.Werks
Central Woodcore Ridge with superslim wings to significantly reduce weight and swing weight and keep the stability where...
Central Woodcore Ridge with superslim wings to significantly reduce weight and swing weight and keep the stability where necessary.
Our 3D.Ridge technology - is probably the most extreme and effective construction technique that currently exists. It has become a symbol of VÖLKL lightweight construction.
The distinctive characteristic of this technology is a raised central ridge that sharply levels out towards the edges, both in front of and behind the binding. This reduces the inertial mass around the fulcrum to a minimum and significantly enhances the agility of the ski. At the same time, the center ridge allows for a precise dimensioning of the hardness distribution, which leads to an especially harmonious flex on the ski. Despite the weight savings, the 3D.Ridge ensures that there are no compromises in the ski‘s durability and elasticity.
All Mountain Race
The steeper the better? You´re a badass and like to show it. „Carving only“ is old news, your turns are fast and creative - some tight, some long. All over the mountain all the time? Deacon 74 and Deacon 76 are the perfect tools for you. Both are made for maximum speed and steering precision while giving you the freedom to ski wherever you want and define your own turn shape.
All Mountain Piste
Action! You´re in search of speed and acceleration and challenging terrain on and off piste? You want THE every day ski that combines performance, edge grip, and power transmission for an aggressive and playful riding style? A ski that delivers on the steep, hard runs just as well as on fresh snow? Enter the Deacon 79, 80 and 84 for guaranteed performance in all snow conditions. For the most memorable days of skiing, including that XL smile on your face.
All Mountain Entry
Just started? Who cares! You´re enthusiastic about skiing and want a ski that helps you to progress easily? Deacon XTD, XT and X Plus guarantee easy turn initiation, solid performance and give you a lot of confidence to reach the next level even faster. All that, and they even support you when the going gets tougher and slopes are more demanding.
Product was added to your favorites. Show favorites